Item # : 112713-982
Model : NVT-652R
Was Price: CNY0/Pcs.
Now Price : CNY0/Pcs.
Last update : 2008.05.11
Manufacturer : AYGAV
NV-652R
The NVT Model NV-652R Video Receiver is an active (amplified) device that allows the reception of real-time monochrome or color video on up to one mile (1,6km) using Category-2 or 3 Unshielded Twisted-Pair (UTP) telephone wire, or up to 1.5 miles (2,4km) NTSC using Category-5. Baseband (composite) signals of any type are supported.
The unparalleled interference rejection and low emissions of the Model NV-652R allow long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated.
|
Specifications * | |
|
Video | |
|
Frequency Response | |
|
DC to 5 Mhz | |
|
Brightness and Sharpness Control | |
|
Adjustable | |
|
Common-mode/Differential-mode Rejection | |
|
15KHz to 5 Mhz |
60 dB typ |
|
Impedance | |
|
Coax, female BNC |
75 ohms |
|
UTP, Terminal Block |
100 ohms |
|
LED Indicators | |
|
Power On |
Blue Indicator Light |
|
Active Signal Present |
Green Indicator Light |
|
Wire Type | |
|
Network Wiring |
One Unshielded Twisted Pair 24-16 AWG (0.5-1.31mm) |
|
Category Type |
Cat 2 or better |
|
Impedance |
100 ± 20 ohms |
|
DC Loop Resistance |
52 ohms per 1,000 ft (18 ohms per 100 m) |
|
Differential Capacitance |
19 pF/ft max (62 pF/m max) |
|
Wire Length |
See Product Chart. |
|
Power | |
|
12-24 VAC/DC (transformer not included) |
100mA max |
|
One floating power supply may power multiple NV–652R Receivers | |
|
Environmental | |
|
Temperature |
0° to +50° C |
|
Humidity (non-condensing) |
0 to 95% |
|
Transient Immunity |
per ANSI/IEEE 587 C62.41 |
|
Mechanical | |
|
Dimensions excluding BNC |
3.00 x 1.54 x 1.10 in (76.2 x 39.1 x 27.9 mm) |
|
Weight |
4.0 oz (100 g) |
|
Material |
Black ABS |
|
Mounting |
Two 0.175 in (4.4 mm) diameter holes 2.5 in (63.5 mm) apart |